Subdivision Platting in Martin County
Professional subdivision platting for Martin County properties in Martin County. Serving 165,666 residents across 543.8 square miles of land with licensed Florida PSM surveyors.
How much does a subdivision platting cost in Martin County?
Subdivision Platting in Martin County are quoted per project, not from a rate card — the price is set by boundary research, fieldwork, recovery or establishment of the applicable property corners, marking the accessible corners, and preparation of a signed and sealed survey. Published Florida government contracts for 2024–2026 put a two-person survey crew at $130–$281 per hour and a licensed surveyor at $136–$383 per hour; what your Martin County project needs of those hours is what sets the figure. Apex Surveying & Mapping provides licensed PSM surveyors with local expertise in Martin County regulations and property records — send us the address and we'll quote it.
Florida Statute Chapter 177 governs subdivision platting requirements. Each plat must include monumentation, easements, and legal descriptions reviewed by the county surveyor before recording.
How Does Subdivision Platting Compare to Other Survey Types?
| Survey Type | Turnaround | Best For |
|---|---|---|
| Boundary Survey | 3–7 days | Property lines, fences, disputes |
| ALTA/NSPS Survey | 2–4 weeks | Commercial real estate transactions |
| Topographic Survey | 1–2 weeks | Site design, grading plans |
| Construction Staking | 1–3 days | Building layout, foundations |
| Elevation Certificate | 3–5 days | Flood insurance, FEMA compliance |
| As-Built Survey | 3–7 days | Permit closeouts, renovations |
| Subdivision Platting ✓ | 4–8 weeks | Land division, new communities |
| Drone Mapping | 3–7 days | Large sites, volume calculations |
| 3D Laser Scanning | 1–2 weeks | As-built BIM, historic preservation |
| Right-of-Way Survey | 2–6 weeks | Roads, utilities, easements |
Turnaround is indicative and varies with scope, access and Martin County local requirements. Survey pricing is quoted per project rather than from a rate card — see the pricing section below.
Local Expertise
Why Do Martin County Properties Need Professional Subdivision Platting?
With $432,200 median home values and Moderate growth growth, Martin County property owners rely on certified subdivision platting for real estate transactions and development compliance.
Our licensed Professional Surveyor and Mapper (PSM) serves Martin County's 543.8 square miles of land area, from Stuart to surrounding communities. We coordinate with the Growth Management Department and local recording offices to ensure your survey meets all county requirements.
Martin County Survey Challenges
- • Coastal with St. Lucie Inlet, Indian River Lagoon, and interior agricultural land terrain affecting field operations
- • Moderate; higher near coast and C-44 canal system
- • Large rural parcels requiring extensive fieldwork
- • Limited survey control in remote areas
Our Local Advantages
- • Experience with all 6 FEMA flood zone types present in Martin County
- • Competitive rural pricing
- • Flexible scheduling options
Surveying in Martin County
Martin County maintains one of the most restrictive growth management plans in Florida, with a development cap that limits building permits. This means survey work focuses heavily on redevelopment, renovations, and high-value custom homes rather than large subdivision plats.
The St. Lucie Inlet provides the only direct ocean access between Fort Pierce and Jupiter, making waterfront properties along the Indian River Lagoon and Manatee Pocket exceptionally valuable. Boundary surveys here require careful mean high water line determinations.
Jonathan Dickinson State Park and other conservation lands occupy significant portions of the county, creating environmental survey requirements and conservation easement documentation needs for any development adjacent to these protected areas.
Pricing
Subdivision Platting Pricing in Martin County
What the work costs in Florida, and why your figure has to be quoted.
Florida market rate for survey work
Source: negotiated rates in Florida city, county, special-district and FDOT contracts, 2024–2026. These are market rates for professional time — not a quote for your project, and not Apex's rate card.
Why we quote instead of listing a price
What a survey costs is set by the work it takes — boundary research, fieldwork, recovering or establishing the applicable property corners, marking the accessible corners, and preparing a signed and sealed survey. Your figure will vary with the number of parcels, scope, location, access, vegetation, travel, and existing monumentation.
Two properties on the same Martin County street can price differently — one with intact corner markers, one where every corner has to be re-established.
Martin County has Moderate flood hazard area — SFHA zones present along waterways and flood-prone areas. FEMA zones present: X, AE, A, VE, AH, AO. Base Flood Elevations are site-specific and are read from the effective FIRM panel. The county has a Coastal Construction Control Line (CCCL) requiring additional survey documentation.
Local Cost Factors for Subdivision Platting in Martin County
Martin County subdivision platting demand is driven by potential agricultural land conversion to residential development. Martin County Growth Management oversees plat review and approval. Growth management policies and environmental protection requirements.
- $ Agricultural and ranch land conversion to residential lots
- $ Martin County plat review, engineering, and recording requirements
- $ Standard subdivision infrastructure coordination
Local Requirements
Subdivision Platting Requirements in Martin County
Understanding local regulations helps ensure your survey meets all Martin County requirements.
Martin County Permit Office
- Department
- Growth Management Department
- Phone
- +1 772 288 5495
- Website
- Visit Martin County Permits
Survey Documentation
Survey documentation requirements vary by permit type and jurisdiction — confirm current submittal requirements with the Growth Management Department before filing.
Martin County Flood Zone Information
- FEMA Flood Zones Present
- X, AE, A, VE, AH, AO
- Special Flood Hazard Area
- Moderate flood hazard area — SFHA zones present along waterways and flood-prone areas
- Base Flood Elevation
- Site-specific — read from the effective FIRM panel for the parcel. Look up a specific address on the FEMA Map Service Center.
- Wind Zone
- Ultimate design wind speed per Florida Building Code Figure 1609.3(1)-(4) — varies by Risk Category and by location within the county
This county has a Coastal Construction Control Line (CCCL). Properties seaward of the CCCL require additional survey documentation per Florida DEP requirements.
Martin County at a Glance
100 miles from our Miami headquarters
Primary service area — next-day scheduling typical
Martin County Quick Reference
- Permit Office
- +1 772 288 5495
- Property Appraiser
- Visit Website
- Flood Zone Coverage
- Moderate flood hazard area — SFHA zones present along waterways and flood-prone areas
- Setbacks & Permit Fees
- Set per zoning district and per municipality — verified against the governing code for your parcel
Local Development Trends in Martin County
Limited growth by county policy. Primarily renovations and infill development. Strict Comprehensive Growth Management Plan limits new subdivision density.
Population growth (5yr): Moderate growth
Permit Process for Subdivision Platting in Martin County
- 1
Contact Growth Management Department
Confirm survey requirements for your specific project type and Martin County zoning district.
- 2
Engage a Licensed Florida Surveyor
A Professional Surveyor and Mapper (PSM) licensed in Florida must perform the survey and certify results.
- 3
Submit Survey with Permit Application
Include the certified survey as part of your Martin County building permit application package.
- 4
County Review and Approval
Growth Management Department reviews survey documentation for compliance with local requirements.
Permit fees: set by the Martin County adopted fee schedule and calculated from project valuation or square footage. Check the Growth Management Department fee schedule for current rates.
Why Subdivision Platting Costs Vary in Martin County
Several factors unique to Martin County influence subdivision platting pricing in this area:
Terrain Type
Coastal with St. Lucie Inlet, Indian River Lagoon, and interior agricultural land
Vegetation
Dense native vegetation in preservation areas; cleared in agricultural and residential zones
Water Table
Moderate; higher near coast and C-44 canal system
Key Challenge
Strict growth management and environmental protection policies require extensive environmental survey coordination
Distance factor: Martin County is 100 miles from our Miami headquarters, which may affect mobilization costs. We maintain regional crews to minimize travel surcharges for distant counties.
Martin County Zoning Overview
Low-density residential along coast; agricultural and rural in western county; Indiantown independent municipality; conservation along St. Lucie River
County Resources
Martin County Property Records & Survey Resources
Key county offices and contacts for property research, deed recording, and permit applications in Martin County.
Property Appraiser
- Office
- Martin County Property Appraiser
- Appraiser
- Jenny Fields
- Phone
- +1 772 288 5608
Recording Office
- Office
- Clerk of the Circuit Court
- Phone
- +1 772 288 5576
- Recording Fees
- $10.00 first page, $8.50 each additional page
Setback Requirements
Front, side and rear setbacks in Martin County are fixed by the zoning district a parcel sits in, and each incorporated municipality adopts its own land development code — there is no single county-wide figure. We confirm the requirement that governs your parcel as part of the survey.
County seat: Stuart | FIPS Code: 12085 | Incorporated municipalities: 5
Why Choose Us
Why Choose Our Subdivision Platting for Martin County
Serving Martin County since our founding, with deep knowledge of local Growth Management Department requirements and 6 FEMA flood zone types.
Martin County developers need platting for new communities
County approval in Martin County requires detailed plats
Martin County land division projects demand professional platting
Martin County's 543.8 sq mi of land area with $432,200 median home values requires local surveying expertise
Common Projects in Martin County
What's Included
What's Included in Your Martin County Subdivision Platting
Every survey includes comprehensive deliverables and professional certification.
Boundary Survey
Parent tract survey establishing subdivision limits In Martin County, Ultimate design wind speed per Florida Building Code Figure 1609.3(1)-(4) — varies by Risk Category and by location within the county requirements may apply.
Lot Layout Design
Lot configuration meeting zoning and market requirements Research includes Martin County records at the Clerk of the Circuit Court (recording fees: $10.00 first page, $8.50 each additional page).
Plat Preparation
Recordable plat meeting Florida Statutes requirements Verified against the zoning and land development code governing your parcel in Martin County.
Agency Coordination
Submission and coordination with planning/engineering
Monument Setting
Permanent monumentation at lot corners and control points
Frequently Asked Questions: Subdivision Platting in Martin County
Answers to common questions about our services in your area.
How long does subdivision platting take in Martin County?
What approvals are needed for Martin County subdivisions?
Can you handle the entire Martin County platting process?
What are the setback requirements for subdivision platting in Martin County?
What FEMA flood zones affect subdivision platting in Martin County?
Are land surveys worth it in Martin County?
Can I do a subdivision platting myself in Florida?
Related Services
Other Survey Services in Martin County
Explore additional surveying services available in your area.
Learn More
Subdivision Platting Guide
Complete guide — how to subdivide land in Florida, the 6-step process, Ch. 177 requirements, and costs.
Subdivision Platting Cost
County-by-county application fees, surveyor costs, and total pricing for lot splits and full plats.
Plat vs Lot Split
When you need full platting vs a simple administrative lot split.
Boundary Surveys in Florida
Boundary surveys form the foundation of every subdivision plat.
Topographic Survey Guide
Topographic data drives subdivision design — drainage, grading, and road layout.
Land Survey Cost in Florida
Complete pricing including platting in FL.
Hiring a Subdivision Surveyor
Ch. 177 expertise, county approval experience, and what to look for.
Subdivision Platting Process
8-step process from feasibility through plat recording.
Related Professional Services
Complete Project Support
Commercial developments often require drainage engineering alongside survey work. For stormwater management plans and permit coordination in Martin County, we recommend CivilSmart Engineering and StructureSmart Engineering — both recognized leaders in Florida drainage engineering.
Service Area
Subdivision Platting Near Martin County
We also provide subdivision platting in these nearby areas.
Statewide Coverage: Our licensed surveyors serve all 67 Florida counties. Don't see your area listed? Contact us for service availability.
Free Quote
Get Your Subdivision Platting Quote for Martin County
Fill out the form below — we typically respond within about an hour during business hours.
Quote Request Received!
We'll typically get back to you within about an hour during business hours.
Something went wrong
You can also call us at +1 305 216 6944.
After Your Subdivision Plat
Subdivision platting in Martin County creates the legal framework for new development, but infrastructure engineering follows immediately after. A civil engineer designs the stormwater management system, road profiles, and utility layouts based on the plat geometry and topographic data. The engineer then creates construction drawings that guide the build phase.
Ready to Get Started with Subdivision Platting in Martin County?
Get your free subdivision platting quote for Martin County in Martin County. Our PSM-licensed surveyors know Martin County's X, AE, A, VE, AH, AO flood zones and Growth Management Department requirements.
Licensed & Insured | Florida PSM | Proudly Serving Martin County, Martin County | 543.8 sq mi land service area